Chapter 5
Setup and Configuration
RUGGEDCOM ROX II
User Guide
322 Customizing Shared Network Clients
Parameter Description
The NetBIOS name server that the DHCP server offers to the client when it issues the
lease to the client.
6. If custom options are required for the shared network client, refer to Section 5.15.6.5, “Customizing Shared
Network Clients”.
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.15.6.5
Customizing Shared Network Clients
Custom DHCP options can be set for a shared network client.
To add a custom DHCP option to a shared network client, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » shared-network » {name} » options » client » custom, where
{name} is the name of the shared network.
3. Click <Add custom>. The Key Settings form appears.
Figure 342: Key Settings Form
1. Number Box 2. Value Box
4. Configure the following parameter(s) as required:
Parameter Description
number
value The value of the custom option.
5. Click Add.
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
To Next Page
Loading...
