Chapter 3
Device Management
RUGGEDCOM ROX II
User Guide
148 Activating a Cellular Modem Account Manually
Figure 152: Trigger Action Form
1. Perform Button
5. On the Over The Air Activation form, configure the following parameter(s) as required:
Parameter Description
activation-dial-string Default: *22899
The dial string to activate the modem over the air
6. On the Trigger Action form, click Perform to activate the account.
Section 3.23.7.2
Activating a Cellular Modem Account Manually
If the service provider does not support Over the Air Service Provisioning (OTASP), the account must be
activated manually.
To manually activate a cellular modem account, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to interfaces » cellmodem » {slot/port/profile} » activation, where {slot/port/profile} is the slot
name, port number and profile configured for the cellular modem.
3. Click manual-activation in the menu. The Manual Activation and Trigger Action forms appears.
To Next Page
Loading...
