RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Deleting a Key Chain 501
Section 5.20.9.5
Deleting a Key Chain
To delete a key chain for dynamic RIP routes, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to routing » dynamic » rip » key-chain. The Key Chain Management table appears.
Figure 573: Key Chain Management Table
1. Add Button 2. Edit Button 3. Delete Button
3. Click Delete next to the chosen key chain.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.20.9.6
Deleting a Key
To delete a key from a key chain, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to routing » dynamic » rip » key-chain » {name} » key, where {name} is the name of the key
chain. The Key Configuration table appears.
Figure 574: Key Configuration Table
1. Add Button 2. Edit Button 3. Delete Button
To Next Page
Loading...
