RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Deleting Hosts 339
Parameter Description
server The NIS server address that the DHCP server offers to the client when it issues the
lease to the client.
domain The NIS domain name that the DHCP server offers to the client when it issues the lease
to the client.
5. On the NetBios Configuration form, configure the following parameters as required:
Parameter Description
scope Default: netbios
The NetBIOS scope that the DHCP server offers to the client when it issues the lease to
the client.
nameserver Default: 127.0.0.1
The NetBIOS name server that the DHCP server offers to the client when it issues the
lease to the client.
6. If custom configuration settings are required for the host client, refer to Section 5.15.10, “Managing Custom
Host Client Configurations”.
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.15.9.5
Deleting Hosts
To delete a host, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » hosts. The Host Configuration table appears.
Figure 364: Host Configuration Table
1. Add Button 2. Edit Button 3. Delete Button
3. Click Delete next to the chosen host.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
To Next Page
Loading...
