Chapter 5
Setup and Configuration
RUGGEDCOM ROX II
User Guide
360 Deleting an Option 82 Class From an IP Pool
Figure 394: Option 82 Configuration Form
1. Remote ID Box 2. Circuit ID Box
6. Configure the following parameter(s) as required:
Parameter Description
remote-id Specifies the information relating to the remote host end of the circuit.
circuit-id Specifies the local information to which circuit the request came in on.
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.15.16.3
Deleting an Option 82 Class From an IP Pool
To delete an Option 82 class from an IP Pool, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » subnet » {name} » options » ippool » {description} » option82,
where {name} is the name of the subnet and {description} is the name of the IP pool. The Option 82
Configuration table appears.
To Next Page
Loading...
