RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Configuring a Shared Network Client 319
Parameter Description
The minimum leased time in seconds that the server offers to the client.
maximum Default: 7200
The maximum leased time in seconds that the server offers to the clients.
4. On the Client Configuration form, configure the following parameters as required:
Parameter Description
unknown-client Synopsis: allow, deny, ignore
The action to take for previously unregistered clients.
authorize-server Enables/disables the server's authorization on this client. If enabled, the server will send
deny messages to the client that is trying to renew the lease, which the server knows the
client shouldn't have.
option82 Enables/disables the NAK of option 82 clients for this subnet.
5. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
6. Click Exit Transaction or continue making changes.
Section 5.15.6.4
Configuring a Shared Network Client
To configure the client for a shared network on the DHCP server, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » shared-network{shared network} » options » client, where {shared
network} is the name of the shared network. The Client Configuration, NIS Configuration and NetBios
Configuration forms appear.
To Next Page
Loading...
