Chapter 5
Setup and Configuration
RUGGEDCOM ROX II
User Guide
618 Managing Pre-Shared Keys
Figure 720: IPSec Status Form
This form provides a detailed log of all IPsec activity.
Section 5.28.5
Managing Pre-Shared Keys
Pre-shared keys are used in secret key cryptography. For more information about secret key cryptography and
pre-shared keys, refer to Section 5.28.1.3, “Public and Secret Key Cryptography”.
The following sections describe how to configure and manage pre-shared keys for IPsec tunnels:
• Section 5.28.5.1, “Viewing a List of Pre-Shared Keys”
• Section 5.28.5.2, “Adding a Pre-Shared Key”
• Section 5.28.5.3, “Deleting a Pre-Shared Key”
Section 5.28.5.1
Viewing a List of Pre-Shared Keys
To view a list of pre-shared keys, navigate to tunnel » ipsec » preshared-key. If pre-shared keys have been
configured, the Preshared Key table appears.
Figure 721: Preshared Key Table
If no pre-shared keys have been configured, add pre-shared keys as needed. For more information, refer to
Section 5.28.5.2, “Adding a Pre-Shared Key”.
Section 5.28.5.2
Adding a Pre-Shared Key
To add a pre-shared key, do the following:
To Next Page
Loading...
