RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Viewing the Status of the LDP Neighbor Connection
Information 815
Parameter Description
Keepalive Interval The keepalive interval of the LDP neighbor local node.
Section 5.39.7.4
Viewing the Status of the LDP Neighbor Connection Information
To view the status of the LDP neighbor connection on the device, navigate to mpls » ldp » status » neighbor »
connection-information. The LDP Neighbor Connection Status Information table appears.
Figure 942: LDP Neighbor Connection Status Information Table
This table provides the following information:
Parameter Description
Peer ID The peer ID of the LDP neighbor connection.
TCP Connection The TCP connection of the LDP neighbor connection.
state The state of the LDP neighbor connection.
Up Time The up time of the LDP neighbor connection.
Section 5.39.7.5
Viewing the Status of the LDP Neighbor Discovery Information
To view the status of the LDP neighbor discovery information on the device, navigate to mpls » ldp » status »
neighbor » discovery-information. The LDP Neighbor Discovery Status Information table appears.
Figure 943: LDP Neighbor Discovery Status Information Table
This table provides the following information:
To Next Page
Loading...
