RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Deleting an LSP Lifetime Interval 427
Figure 469: Maximum LSP Lifetime Routing Type Form
1. Interval Box
5. Configure the following parameter(s) as required:
Parameter Description
Interval Minimum interval in seconds, ranging from 350 to 65535 seconds. Default is 1200.
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.18.8.3
Deleting an LSP Lifetime Interval
To delete an LSP lifetime interval for an IS-IS area, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to routing » dynamic » isis » area » {name} » max-lsp-lifetime, where {name} is the unique
name for a routing process that belongs to a specific router. The Maximum LSP Lifetime Routing Type
table appears.
Figure 470: Maximum LSP Lifetime Routing Type
1. Add Button 2. Edit Button 3. Delete Button
3. Click Delete next to the chosen interval.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
To Next Page
Loading...
