RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Viewing a List of Custom Host Group Client
Configurations 349
• Section 5.15.12.3, “Deleting Custom Host Group Client Configurations”
Section 5.15.12.1
Viewing a List of Custom Host Group Client Configurations
To view a list of custom configurations for host group clients on the DHCP server, navigate to services »
dhcpserver » host-groups » {host} » options » client » custom, where {host} is the name of the host group. If
custom configurations have been configured, the Custom Configuration table appears.
Figure 376: Custom Configuration Table
If no custom configurations have been configured for the host group client, add custom configurations as needed.
For more information, refer to Section 5.15.10.2, “Adding Custom Host Client Configurations”.
Section 5.15.12.2
Adding Custom Host Group Client Configurations
To add a custom configuration to a host group client on the DHCP server, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » host-groups » {host} » options » client » custom, where {host} is
the name of the host group.
3. Click <Add custom>. The Key Settings form appears.
Figure 377: Key Settings Form
1. Number Box 2. Value Box 3. Add Button
4. Configure the following parameter(s) as required:
To Next Page
Loading...
