RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Viewing a List of Prefix Lists 453
• Section 5.19.5.6, “Deleting a Prefix Entry”
Section 5.19.5.1
Viewing a List of Prefix Lists
To view a list of prefix lists for dynamic BGP routes, navigate to one routing » dynamic » bgp » filter » prefix-
list. If prefix lists have been configured, the Prefix List table appears.
Figure 506: Prefix List Table
If no prefix lists have been configured, add lists as needed. For more information, refer to Section 5.19.5.3,
“Adding a Prefix List”.
Section 5.19.5.2
Viewing a List of Prefix Entries
To view a list of entries for dynamic BGP prefix lists, navigate to routing » dynamic » bgp » filter » {name} »
entry, where {name} is the name of the prefix list. If entries have been configured, the Prefix List Entry table
appears.
Figure 507: Prefix List Entry Table
If no entries have been configured, add entries as needed. For more information, refer to Section 5.19.5.4,
“Adding a Prefix Entry”.
Section 5.19.5.3
Adding a Prefix List
To add a prefix list for dynamic BGP routes, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to routing » dynamic » bgp » filter » prefix-list and click <Add prefix-list>. The Key Settings
form appears.
To Next Page
Loading...
