Chapter 2
Using ROX II
RUGGEDCOM ROX II
User Guide
28 Using the Command Line Interface
Figure 16: MPLS Traceroute Screen
1. Remote IP Address/Prefix Box 2. Start Button 3. Result Window
3. Type the IPv4 address in the Remote IP Address/Prefix box and click Start. The results of the trace are
displayed in the Result Window.
Section 2.7
Using the Command Line Interface
The Web interface includes a built-in Command Line Interface (CLI). To access the Command Line Interface
(CLI) from within the Web interface, select the Tools menu and click CLI. The CLI screen appears.
To Next Page
Loading...
