Chapter 3
Device Management
RUGGEDCOM ROX II
User Guide
150 Resetting the Cellular Modem
5. On the Trigger Action form, click Perform to activate the account.
Section 3.23.8
Resetting the Cellular Modem
To reset a cellular modem, do the following:
1. Navigate to interfaces » cellmodem » {slot/port/profile}, where {slot/port/profile} is the slot name, port
number and profile configured for the cellular modem.
2. Click reset in the menu. The Trigger Action form appears.
Figure 155: Trigger Action Form
1. Perform Button
3. Click Perform.
Section 3.23.9
Running AT Commands
To issue AT (Hayes) commands to the cellular modem, do the following:
1. Navigate to interfaces » cellmodem » {slot/port/profile} and click at in the menu. The AT Command and
Trigger Action forms appears.
Figure 156: AT Command Form
1. Command Box
To Next Page
Loading...
