RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Adding a DHCP Listen Interface 315
If no DHCP listen interfaces have been configured, add interfaces as needed. For more information, refer to
Section 5.15.5.2, “Adding a DHCP Listen Interface”.
Section 5.15.5.2
Adding a DHCP Listen Interface
To add a DHCP listen interface, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » interface and click <Add interface>. The Key Settings form appears.
Figure 333: Key Settings Form
1. Name Box 2. Add Button
3. Configure the following parameter(s) as required:
Parameter Description
name
4. Click Add to create the new DHCP listen interface.
5. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
6. Click Exit Transaction or continue making changes.
Section 5.15.5.3
Deleting a DHCP Listen Interface
To delete a DHCP listen interface, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » interface. The Listen Interfaces table appears.
To Next Page
Loading...
