Chapter 5
Setup and Configuration
RUGGEDCOM ROX II
User Guide
664 Viewing a List of GRE Tunnels
This table provides the following information:
Parameter Description
Name The GRE tunnel interface name.
tunnel-status The status of the tunnel.
rx-packets The number of packets received through the tunnel.
rx-errors The error packets received through the tunnel.
rx-drops The number of packets dropped by the tunnel.
tx-packets The number of packets transmitted through the tunnel.
tx-errors The number of error packets transmitted through the tunnel.
tx-drops The number of packets dropped by the tunnel.
Section 5.30.2
Viewing a List of GRE Tunnels
To view a list of GRE tunnels, navigate to tunnel » gre. If tunnels have been configured, the Generic Routing
Encapsulation Interfaces table appears.
Figure 784: Generic Routing Encapsulation Interfaces Table
If no GRE tunnels have been configured, add tunnels as needed. For more information, refer to Section 5.30.3,
“Adding a GRE Tunnel”.
Section 5.30.3
Adding a GRE Tunnel
To add a GRE tunnel, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to tunnel » gre and click <Add gre> in the menu. The Key Settings form appears.
To Next Page
Loading...
