Chapter 5
Setup and Configuration
RUGGEDCOM ROX II
User Guide
456 Deleting a Prefix List
Parameter Description
Default: permit
Action.
Network Network (xxx.xxx.xxx.xxx/xx).
Maximum prefix to mask for subnet The maximum prefix length to match ipaddress within subnet.
Minimum prefix to mask for subnet The minimum prefix length to match ipaddress within subnet.
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.19.5.5
Deleting a Prefix List
To delete a prefix list for dynamic BGP routes, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to routing » dynamic » bgp » filter » prefix-list. The Prefix List table appears.
Figure 512: Prefix List Table
1. Add Button 2. Edit Button 3. Delete Button
NOTE
Deleting a prefix list removes all associate prefix entries as well.
3. Click Delete next to the chosen prefix list.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.19.5.6
Deleting a Prefix Entry
To delete an entry for a dynamic BGP prefix list, do the following:
To Next Page
Loading...
