RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Adding a Host Group 343
If no host groups have been configured, add host groups as needed. For more information, refer to
Section 5.15.11.2, “Adding a Host Group”.
Section 5.15.11.2
Adding a Host Group
To add a host group to the DHCP server, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » host-groups and click <Add host-groups>. The Key Settings form
appears.
Figure 369: Key Settings Form
1. Name Box 2. Add Button
3. Configure the following parameter(s) as required:
Parameter Description
name The description of the host groups.
4. Click Add to create the new host group.
5. Configure the options for the host group. For more information, refer to Section 5.15.11.3, “Configuring Host
Group Options”
6. Configure the client for the host group. For more information, refer to Section 5.15.11.4, “Configuring a Host
Group Client”.
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.15.11.3
Configuring Host Group Options
To configure options for a host group on the DHCP server, do the following:
To Next Page
Loading...
