RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Enabling and Configuring CLI Sessions 241
Section 5.3
Enabling and Configuring CLI Sessions
To enable and configure CLI sessions, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to admin. The CLI Sessions form appears.
Figure 252: CLI Sessions
1. Enabled Check Box 2. Listen IP Box 3. Listen Port Box 4. Extra IP Ports Box 5. Maximum Number of CLI Sessions Box
6. Idle Timeout Box 7. Greeting Box
3. Configure the following parameter(s):
To Next Page
Loading...
