Chapter 4
System Administration
RUGGEDCOM ROX II
User Guide
186 Configuring the Hostname
3. Configure the following parameter(s) as required:
Parameter Description
System Name Default: System Name
An administratively-assigned name for this managed node. By convention, this is the
node's fully-qualified domain name. If the name is unknown, the value is the zero-length
string.
Location Default: Location
The physical location of this node (e.g., 'telephone closet, 3rd floor'). If the location is
unknown, the value is the zero-length string.
contact Default: Contact
The textual identification of the contact person for this managed node, together with
information on how to contact this person. If no contact information is known, the value
is the zero-length string.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 4.2
Configuring the Hostname
To configure the hostname for the device, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to admin. The Hostname form appears.
Figure 197: Hostname Form
1. Name Box 2. Domain Box
3. Configure the following parameter(s) as required:
Parameter Description
name Default: ruggedcom
The hostname that is the name of this device.
To Next Page
Loading...
