RUGGEDCOM ROX II
User Guide
Chapter 4
System Administration
Deleting a Certificate 211
Parameter Description
name The name of the certificate.
5. Click Add. The Certificate form appears.
Figure 224: Certificate Form
1. Contents Box 2. Private Key Name List 3. CA Certificate Name List
6. Configure the following parameter(s) as required:
Parameter Description
Contents The contents of the certificate.
Private Key Name The private key associated with this certificate.
CA Name The optional CA certificate for this certificate.
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 4.7.4.4
Deleting a Certificate
To delete a certificate, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to security » crypto » certificate. The Certificate table appears.
To Next Page
Loading...
