Chapter 3
Device Management
RUGGEDCOM ROX II
User Guide
34 Viewing Flash Card Storage Utilization
Section 3.2.3
Viewing Flash Card Storage Utilization
To view the Flash card storage utilization statistics for the Flash card installed in the device, navigate to
chassis » storage. The Flash form appears.
Figure 21: Flash form
1. Storage Name 2. Total Capacity (KB) 3. Current Partition 4. Current Partition Capacity (KB) 5. Secondary Partition Capacity
(KB) 6. Current Partition Usage (%)
This table provides the following information:
Parameter Description
Storage Name The type of storage.
Total Capacity (KiB) The total capacity of the flash storage in KB.
Current Partition The partition ROX is currently running on and booted from.
Current Partition Capacity (KiB) The capacity of the current partition in KB.
Secondary Partition Capacity (KiB) The capacity of the secondary partition in KB.
Current Partition Usage (%) The %usage of the current partition.
Section 3.2.4
Viewing CPU/RAM Utilization
To view the CPU/RAM utilization statistics for each module installed in the device, navigate to chassis » cpu.
The Slot CPU/RAM Utilization table appears.
To Next Page
Loading...
