Chapter 5
Setup and Configuration
RUGGEDCOM ROX II
User Guide
348 Deleting a Host Group
Parameter Description
The NetBIOS name server that the DHCP server offers to the client when it issues the
lease to the client.
6. If custom configuration settings are required for the host group client, refer to Section 5.15.12, “Managing
Custom Host Group Client Configurations”.
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.15.11.5
Deleting a Host Group
To delete a host group, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » host-groups. The Host Group Configuration table appears.
Figure 375: Host Group Configuration Table
1. Add Button 2. Edit Button 3. Delete Button
3. Click Delete next to the chosen host group.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.15.12
Managing Custom Host Group Client Configurations
Custom configuration settings can be set for each host group client.
The following sections describe how to configure and manage custom host group client configurations on a
DHCP server:
• Section 5.15.12.1, “Viewing a List of Custom Host Group Client Configurations”
• Section 5.15.12.2, “Adding Custom Host Group Client Configurations”
To Next Page
Loading...
