RUGGEDCOM ROX II
User Guide
Chapter 4
System Administration
Setting the Boot Password/Passphrase 229
Figure 243: Set Boot Password Form
1. New Password Box 2. New Password Repeat Box 3. Old Password Box
Figure 244: Trigger Action Form
1. Perform Button
2. On the Set Boot Password form, configure the following parameters:
Parameter Description
new-password The new password or passphrase. Make sure the password/passphrase complies with
the password complexity rules configured for this device.
new-password-repeat The new password or passphrase. Make sure the password/passphrase complies with
the password complexity rules configured for this device.
old-password Specify the old password if there is currently a boot password set.
3. On the Trigger Action form, click Perform.
To Next Page
Loading...
