Chapter 5
Setup and Configuration
RUGGEDCOM ROX II
User Guide
276 Adding an SNMP Group
Figure 285: Key Settings Form
1. Group Box 2. Security Model List 3. Security Level List 4. Add Button
3. Configure the following parameter(s) as required:
Parameter Description
Group The name of the SNMP group.
Security Model Synopsis: any, v1, v2c, v3
The SNMP security model to use: SNMPv1, SNMPv2c, or USM/SNMPv3.
Security Level Synopsis: noAuthNoPriv, authNoPriv, authPriv
The SNMP security level:
• authPriv: Communication with authentication and privacy.
• authNoPriv: Communication with authentication and without privacy.
• noAuthnoPriv: Communication without authentication and privacy.
4. Click Add to create the protocol. The SNMP Group Access Configuration screen appears.
To Next Page
Loading...
