RUGGEDCOM ROX II
User Guide
Chapter 5
Setup and Configuration
Configuring a Subnet Client 329
Figure 351: NetBios Configuration Form
1. Scope Box 2. Name Server Box
3. In the Client Configuration form, configure the following parameters as required:.
Parameter Description
hostname The unique name to refer to the host within a DHCP configuration.
subnetmask Subnet mask
default-route The default route that the server offers to the client when it issues the lease to the client.
broadcast The broadcast address that the server offers to the client when it issues the lease to the
client.
domain The domain name that the server offers to the client when it issues the lease to the
client.
dns-server The domain name server that the server offers to the client when it issues the lease to
the client.
static-route The static route that the DHCP server offers to the client when it issues the lease to the
client.
4. In the NIS Configuration form, configure the following parameters as required:
Parameter Description
server The NIS server address that the DHCP server offers to the client when it issues the
lease to the client.
domain The NIS domain name that the DHCP server offers to the client when it issues the lease
to the client.
5. In the NetBios Configuration form, configure the following parameters as required:
Parameter Description
scope Default: netbios
The NetBIOS scope that the DHCP server offers to the client when it issues the lease to
the client.
nameserver Default: 127.0.0.1
To Next Page
Loading...
