Network operation and remote control
R&S
®
RTE
1026User Manual 1326.1032.02 ─ 20
A progress information dialog is displayed. You can terminate at any time with
"Cancel".
During the restore process, the system partition is deleted, formatted and written
newly. The data partition is not affected. After the process has been finished, the
application is closed automatically, and the R&S RTE is restarted.
To delete a backup version
To provide space for new backups, you can remove older backups. The factory default
cannot be deleted.
1. Restart the R&S RTE.
2. When the boot screen is displayed, immediately select "Backup", and press
[ENTER].
3. Select the backup that you want to delete.
4. Select "Delete Selected".
5. Confirm with "Yes".
6. In the main dialog, select "Exit and Reboot", or continue with "To save a system
backup" on page 1025.
17.1.5 Accessing windows functionality
All required Windows settings can be changed using the touchscreen and the on-
screen keyboard that is part of the Windows system. However, modification is easier if
you connect a mouse and/or keyboard to the instrument.
To access Windows
► On the "File" menu, select "Minimize application".
The application is minimized to the taskbar and the "Start" menu becomes availa-
ble.
To access Windows using an external keyboard
1. To open the "Start" menu, press the Windows key or the CTRL + ESC key combi-
nation on your keyboard.
2. To access the desktop, press the Windows key + D on your keyboard.
To access Windows settings directly from the firmware
Important Windows settings can be accessed directly from the R&S RTE interface.
1. Press the SETUP key and tap the "System" tab.
Operating system
To Next Page
Loading...
