Mixed signal option (MSO, R&S RTE-B1)
R&S
®
RTE
899User Manual 1326.1032.02 ─ 20
You can display each bus and use it as trigger source, as well. For each active parallel
bus, the corresponding signal icon appears on the signal bar and indicates the
assigned digital channels. Individual digital channels do not have a signal icon.
If one or more parallel buses are active, the roll mode is not available.
14.1.1
Parallel buses - configuration
Access: "Analysis" menu > "Parallel buses"
Digital channels can be displayed individually, and they can be grouped and displayed
as a parallel bus. You can configure and enable up to 4 parallel buses. Each digital
channel can be assigned to one active parallel bus only, the instrument disables con-
flicting buses automatically.
For clocked buses, you can display the decoded data in a result box.
Digital channels and parallel buses
To Next Page
Loading...
