Rohde & Schwarz RTE - Screen Setup; Setting the Display Language

Instrument setup
R&S
®
RTE
137User Manual 1326.1032.02 ─ 20
"Explore"
Opens the Windows file explorer where you can navigate and search
for files and folders as usual.
Start internet update
Starts the "RTxUpdater", which connects to the internet, checks for newer versions,
downloads the firmware file, and installs the firmware. Only users with administrator
rights can fulfill this task.
Make sure that your device is connected to the Internet. If your corporate network uses
a proxy server, enter the proxy settings in "Settings" menu > "Proxy Settings". Ask your
administrator for correct proxy settings.
A short instruction is available under "Help" > "Help".
4.1.2 Setting the display language
You can change the language in which the dialog boxes, result boxes and other screen
information is displayed. A reboot of the instrument is not necessary.
1. Press the [SETUP] key.
2. Tap the "Language" button. The button shows the current language.
3. Select the required language.
The instrument changes the language after a few seconds.
4.2 Screen setup
● Screen settings..................................................................................................... 138
● Aligning the touchscreen.......................................................................................139
Screen setup