EasyManua.ls Logo

Rohde & Schwarz RTE - Trigger

Rohde & Schwarz RTE
2078 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote control commands
R&S
®
RTE
1609User Manual 1326.1032.02 ─ 20
Parameters:
<ThresholdHigh> Range: 0 to 14
Increment: 0.1
*RST: 5
Default unit: V
BUS<m>:MILStd:THReshold:LOW <ThresholdLow>
Sets the lower threshold level of the signal.
Suffix:
<m>
.
1..4
Parameters:
<ThresholdLow> Range: -14 to 0
Increment: 0.1
*RST: -5
Default unit: V
18.17.10.2
Trigger
The trigger suffix <m> is always 1 and can be omitted. It selects the trigger event: Only
the A-trigger is available for triggering on serial buses.
To trigger on a serial bus, make sure that:
TRIGger<m>:SOURce[:SELect] is set to SBUS.
The sources of the serial bus are channel signals: use BUS<m>:...:SOURce
commands.
Decoding is enabled: BUS<m>[:STATe] is set to ON.
TRIGger<m>:MILStd:TYPE...........................................................................................1610
TRIGger<m>:MILStd:DATA:RCONdition......................................................................... 1611
TRIGger<m>:MILStd:CMD:RCONdition..........................................................................1611
TRIGger<m>:MILStd:CDST:RCONdition.........................................................................1611
TRIGger<m>:MILStd:DATA:RMIN.................................................................................. 1611
TRIGger<m>:MILStd:CMD:RMIN...................................................................................1611
TRIGger<m>:MILStd:CDST:RMIN..................................................................................1611
TRIGger<m>:MILStd:DATA:RMAX................................................................................. 1611
TRIGger<m>:MILStd:CMD:RMAX..................................................................................1611
TRIGger<m>:MILStd:CDST:RMAX.................................................................................1611
TRIGger<m>:MILStd:CMD:CCONdition..........................................................................1612
TRIGger<m>:MILStd:CMD:CMAX..................................................................................1612
TRIGger<m>:MILStd:CMD:CMIN...................................................................................1612
TRIGger<m>:MILStd:CMD:SCONdition..........................................................................1612
TRIGger<m>:MILStd:CMD:SMAX..................................................................................1613
TRIGger<m>:MILStd:CMD:SMIN...................................................................................1613
TRIGger<m>:MILStd:CMD:TR.......................................................................................1613
TRIGger<m>:MILStd:CDST:ICONdition.......................................................................... 1614
TRIGger<m>:MILStd:CDST:IMAX..................................................................................1614
TRIGger<m>:MILStd:CDST:IMIN................................................................................... 1614
Protocols

Table of Contents

Other manuals for Rohde & Schwarz RTE

Related product manuals