Rohde & Schwarz RTE - Probe Adapter R&S RT-Z2 T

Remote control commands
R&S
®
RTE
1142User Manual 1326.1032.02 ─ 20
TRPRobe:ID:SRNumber?
PROBe<m>:ID:SRNumber?
Queries the serial number of the probe.
Suffix:
<m>
.
1..4
Selects the input channel.
Return values:
<SerialNo> Serial number in a string.
Usage: Query only
Asynchronous command
TRPRobe:SETup:CAPacitance?
PROBe<m>:SETup:CAPacitance?
Queries the input capacitance of the probe.
Suffix:
<m>
.
1..4
Selects the input channel.
Return values:
<InputCapacity> Range: 100E-15 to 1E-9
*RST: 10E-12
Default unit: F
Usage: Query only
Asynchronous command
TRPRobe:SETup:IMPedance?
PROBe<m>:SETup:IMPedance?
Queries the termination of the probe.
Suffix:
<m>
.
1..4
Selects the input channel.
Return values:
<InputImpedance> Range: 0 to 1E+9
*RST: 50
Default unit:
Ω
Usage: Query only
Asynchronous command
18.8.7.9 Probe adapter R&S RT‑Z2T
PROBe<m>:SETup:ADAPter?....................................................................................... 1143
PROBe<m>:SETup:ATTenuation:TDEFprobe..................................................................1143
Acquisition and setup