Rohde & Schwarz RTE - History

Remote control commands
R&S
®
RTE
1231User Manual 1326.1032.02 ─ 20
CALCulate:MATH<m>:DATA[:VALues]?
Returns the data of the math waveform points for transmission from the instrument to
the controlling computer. The data can be used in MATLAB, for example.
To set the export format, use FORMat[:DATA].
You can retrieve only Y-values, or X- and Y-values. Use EXPort:WAVeform:
INCXvalues to define this.
Suffix:
<m>
.
1..8
Selects the math waveform.
Return values:
<Data> List of values according to the format and content settings.
Usage: Query only
18.10.4
History
CHANnel<m>[:WAVeform<n>]:HISTory[:STATe]...............................................................1231
ACQuire:AVAilable?......................................................................................................1232
CHANnel<m>[:WAVeform<n>]:HISTory:CURRent............................................................1232
CHANnel<m>[:WAVeform<n>]:HISTory:STARt................................................................ 1232
CHANnel<m>[:WAVeform<n>]:HISTory:STOP.................................................................1233
CHANnel<m>[:WAVeform<n>]:HISTory:TPACq............................................................... 1233
CHANnel<m>[:WAVeform<n>]:HISTory:PLAY................................................................. 1233
CHANnel<m>[:WAVeform<n>]:HISTory:REPLay..............................................................1234
CHANnel<m>[:WAVeform<n>]:HISTory:TSDate?.............................................................1234
CHANnel<m>[:WAVeform<n>]:HISTory:TSABsolute?.......................................................1234
CHANnel<m>[:WAVeform<n>]:HISTory:TSRelative?........................................................1235
CHANnel<m>[:WAVeform<n>]:HISTory:TSRReference?.................................................. 1235
CHANnel<m>[:WAVeform<n>]:HISTory[:STATe] <State>
Enables or disables the history display.
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
[:WAVeform<n>] is irrelevant, omit it.
Parameters:
<State> ON | OFF
*RST: OFF
Usage: Asynchronous command
Waveform analysis