Rohde & Schwarz RTE - Power Efficiency

Remote control commands
R&S
®
RTE
1970User Manual 1326.1032.02 ─ 20
●
RMS: RMS value of the long-term measurement results
●
STDDev: standard deviation of the long-term measurement results
Query parameters:
<MeasType> SWF | TON | TOF | CON | NCO | TOT
Usage: Query only
POWer:SWITching:RESult:POWer:ACTual? <MeasType>
POWer:SWITching:RESult:POWer:AVG? <MeasType>
POWer:SWITching:RESult:POWer:EVTCount? <MeasType>
POWer:SWITching:RESult:POWer:NPEak? <MeasType>
POWer:SWITching:RESult:POWer:PPEak? <MeasType>
POWer:SWITching:RESult:POWer:RMS? <MeasType>
POWer:SWITching:RESult:POWer:STDDev? <MeasType>
POWer:SWITching:RESult:POWer:WFMCount? <MeasType>
Return the specified statistic result of the specified measurement type.
●
[:ACTual]: current measurement result
●
AVG: average of the long-term measurement results
●
EVTCount: number of measurement results in the long-term measurement
●
NPEak: negative peak value of the long-term measurement results
●
PPEak: positive peak value of the long-term measurement results
●
RMS: RMS value of the long-term measurement results
●
STDDev: standard deviation of the long-term measurement results
Query parameters:
<MeasType> SWF | TON | TOF | CON | NCO | TOT
Usage: Query only
18.20.13 Power efficiency
POWer:EFFiciency:AUTO.............................................................................................1970
POWer:EFFiciency:EXECute.........................................................................................1971
POWer:EFFiciency:REPort:ADD....................................................................................1971
POWer:EFFiciency:RESult<m>:ACTual?........................................................................1971
POWer:EFFiciency:RESult<m>:AVG?............................................................................1971
POWer:EFFiciency:RESult<m>:EVTCount?....................................................................1971
POWer:EFFiciency:RESult<m>:NPEak?.........................................................................1971
POWer:EFFiciency:RESult<m>:PPEak?.........................................................................1971
POWer:EFFiciency:RESult<m>:RMS?........................................................................... 1971
POWer:EFFiciency:RESult<m>:STDDev?...................................................................... 1971
POWer:EFFiciency:RESult<m>:WFMCount?.................................................................. 1971
POWer:EFFiciency:AUTO <Autoscale>
Selects the scaling for the display of the results.
Power analysis (option R&S
RTE-K31)