Acquisition and waveform setup
R&S
®
RTE
217User Manual 1326.1032.02 ─ 20
4. To see the information on the adapter, select "Adapter Attributes".
5. Select the "Predefined probe" in the "Setup" tab.
See also: Chapter 5.5.6, "Setup for predefined probes", on page 209.
Remote commands:
●
PROBe<m>:SETup:ADAPter? on page 1143
●
PROBe<m>:SETup:ATTenuation:TDEFprobe on page 1143
5.6 R&S RT-ZVC probe
With the R&S RTE and option R&S RTE-B1E, you can use the R&S RT-ZVC multi-
channel power probe. It has an integrated 2- or 4-channel amperemeter and 2- or 4-
channel voltmeter. The probe provides parallel measurements of analog or digital, volt-
age/current signals with excellent 18-bit resolution.
For more information on the R&S RT-ZVC probe, see also its user manual.
R&S
RT-ZVC probe
To Next Page
Loading...
