Network operation and remote control
R&S
®
RTE
1035User Manual 1326.1032.02 ─ 20
●
"LAN Configuration" opens the menu with configuration pages.
●
"Status" shows information about the status of the instrument.
●
"Utilities > Logging" shows log messages and provides buttons to download or
clear the logfile.
●
"Web Control" emulates the front panel and shows the instrument display. You see
a live image of the instrument, and you can operate the instrument remotely. You
can use the keys, the knobs and the menus in the same way as directly on the
instrument.
●
"Device Screenshot": creates a screenshot of the display.
●
"Help" provides a glossary of terms related to the standard, and a link to the
Rohde & Schwarz Internet site.
17.3.2.1 LAN configuration
The LAN configuration consists of three parts:
●
"IP configuration" provides all mandatory LAN parameters.
●
"Advanced LAN Configuration" provides LAN settings that are not declared manda-
tory by the standard.
●
"Ping Client" provides the ping utility to verify the connection between the instru-
ment and other devices.
IP configuration
The "LAN Configuration > IP configuration" web page displays all mandatory LAN
parameters and allows their modification.
The "TCP/IP Mode" configuration field controls how the IP address for the instrument
gets assigned (see also Chapter 17.2.2, "Assigning the IP address", on page 1028).
For the manual configuration mode, the static IP address, subnet mask, and default
gateway are used to configure the LAN. The automatic configuration mode uses DHCP
server or Dynamic Link Local Addressing (automatic IP) to obtain the instrument IP
address.
Web interface
To Next Page
Loading...
