Rohde & Schwarz RTE - Autonaming Settings

Data and file management
R&S
®
RTE
499User Manual 1326.1032.02 ─ 20
12.3.1 Autonaming settings
In this tab, you can define the pattern for automatic file name generation. This name is
used as the default file name. The default path is the storage location for all saved files
and their subdirectories.
Prefix
If enabled, inserts the default prefix in the file name. The prefix indicates the type of
data that is saved, for example, Histogram, RefCurve, Settings.
Autonaming