Rohde & Schwarz RTE - XY-Diagram

Remote control commands
R&S
®
RTE
1235User Manual 1326.1032.02 ─ 20
CHANnel<m>[:WAVeform<n>]:HISTory:TSRelative?
Returns the relative time of the current acquisition - the time difference to the newest
acquisition (index = 0).
See also: (CHANnel<m>[:WAVeform<n>]:HISTory:CURRent).
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
[:WAVeform<n>] is irrelevant, omit it.
Return values:
<TimeRelativ> Range: -100E+24 to 100E+24
Default unit: s
Usage: Query only
Asynchronous command
CHANnel<m>[:WAVeform<n>]:HISTory:TSRReference?
Returns the relative time of the currently selected acquisition and the internal reference
time (horizontal alignment) in history view with respect to the acquisition with index 0.
Suffix:
<m>
.
1..4
Selects the input channel.
<n> 1..3
[:WAVeform<n>] is irrelevant, omit it.
Return values:
<TimeRelIntRef> Range: -100E+24 to 100E+24
Increment: 1
*RST: 0
Default unit: s
Usage: Query only
Asynchronous command
Firmware/software: Version 2.70
18.10.5 XY-Diagram
WAVeform<m>:XYCurve:RATio..................................................................................... 1236
WAVeform<m>:XYCurve:STATe.....................................................................................1236
WAVeform<m>:XYCurve:SWAP.................................................................................... 1236
LAYout:SIGNal:AXIS.....................................................................................................1236
WAVeform<m>:XYCurve:XSOurce.................................................................................1237
WAVeform<m>:XYCurve:YSOurce.................................................................................1237
Waveform analysis