Rohde & Schwarz RTE - Display Settings

Remote control commands
R&S
®
RTE
1089User Manual 1326.1032.02 ─ 20
Return values:
<Error> Error/event_number,"Error/event_description>[;Device-depend-
ent info]"
If the queue is empty, the response is 0,"No error".
Usage: Query only
SCPI confirmed
SYSTem:ERRor:CODE:ALL?
Queries the error/event queue for all unread items and removes them from the queue.
The response is a comma-separated list of error numbers in FIFO order.
Positive error numbers are instrument-dependent. Negative error numbers are
reserved by the SCPI standard.
Return values:
<Error> If the queue is empty, the response is 0.
Usage: Query only
SCPI confirmed
SYSTem:ERRor:CODE[:NEXT]?
Queries the error/event queue for the oldest item and removes it from the queue. The
response is the error number.
Positive error numbers are instrument-dependent. Negative error numbers are
reserved by the SCPI standard.
Return values:
<Error> If the queue is empty, the response is 0.
Usage: Query only
SCPI confirmed
SYSTem:ERRor:COUNt?
Queries the number of entries in the error queue.
Return values:
<Count> If the queue is empty, the response is 0.
Usage: Query only
SCPI confirmed
18.7.2 Display settings
● Signal colors / persistence.................................................................................. 1090
● Color tables.........................................................................................................1092
● Smartgrid.............................................................................................................1094
Instrument setup