Rohde & Schwarz RTE - CSV Export; Long Term Measurement Results and Measurement Histogram Export to File

Remote control commands
R&S
®
RTE
1410User Manual 1326.1032.02 ─ 20
18.16.8 CSV export
EXPort:RESult:DECSymbol.......................................................................................... 1410
EXPort:RESult:DELimiter..............................................................................................1410
EXPort:RESult:DECSymbol <DecimalSymbol>
Sets if point or comma is used as a decimal symbol.
Parameters:
<DecimalSymbol> POINt | COMMa
*RST: POINt
EXPort:RESult:DELimiter <CsvDelimiter>
Selects the list separator symbol from a list.
Parameters:
<CsvDelimiter> SEMICOLON | COMMA | SPACE | TAB | COLON
*RST: COMMA
18.16.9 Long term measurement results and measurement histogram
export to file
EXPort:MEASurement:SELect.......................................................................................1410
EXPort:MEASurement:TYPE.........................................................................................1410
EXPort:MEASurement:NAME........................................................................................1411
EXPort:MEASurement:SAVE.........................................................................................1411
EXPort:MEASurement:DATA?....................................................................................... 1411
EXPort:MEASurement:SELect <SelcMeas>
Selects the measurement for export of long term or measurement histogram data.
Parameters:
<SelcMeas> MEAS1 | MEAS2 | MEAS3 | MEAS4 | MEAS5 | MEAS6 |
MEAS7 | MEAS8
*RST: MEAS1
Example: See "Exporting long-term measurement data to file"
on page 1059
Usage: Asynchronous command
EXPort:MEASurement:TYPE <ExportType>
You can export the result data of the long term measurement, or the measurement his-
togram, or the track data.
Data management