Remote control commands
R&S
®
RTE
1411User Manual 1326.1032.02 ─ 20
To export the measurement histogram, it must be enabled using MEASurement<m>:
STATistics:HISTogram.
To export the long term results, the long term measurement must be enabled using
MEASurement<m>:LTMeas[:STATe].
To export a track, the track must be enabled before. Track measurements require an
option, see "Enable (Track)" on page 389.
Parameters:
<ExportType> LONGterm | HISTogram | TRACk
LONGTERM = LONGterm, HISTOGRAM = HISTogram
*RST: HISTogram
Example: See "Exporting long-term measurement data to file"
on page 1059
Usage: Asynchronous command
EXPort:MEASurement:NAME <Path>
Sets the file name and path to save the long term or measurement histogram data to.
Parameters:
<Path> String with path and file name. The file extension defines the file
format: XML, CSV, or BIN.
Example: See "Exporting long-term measurement data to file"
on page 1059
Usage: Asynchronous command
EXPort:MEASurement:SAVE
Saves the long term or measurement histogram results to the file specified using
EXPort:MEASurement:NAME.
The measurement data can be exported as absolute or relative values, which is
defined using EXPort:HISTogram:INCidence.
Example:
See "Exporting long-term measurement data to file"
on page 1059
Usage: Event
EXPort:MEASurement:DATA?
Transfers the long term measurement data to the controlling computer. The data can
be used in MATLAB, for example. The transferred data are the same as the data writ-
ten to files.
Data management
To Next Page
Loading...
