Rohde & Schwarz RTE - Gating

Remote control commands
R&S
®
RTE
1302User Manual 1326.1032.02 ─ 20
MEASurement<m>:TRACk:DATA:STYPe?
Returns the data type: TRK (track).
Suffix:
<m>
.
1..10
See "Selection of the measurement: MEASurement<m>"
on page 1249.
Usage: Query only
MEASurement<m>:TRACk:DATA[:VALues]?
Returns the data of track points for transmission from the instrument to the controlling
computer. The data can be used in MATLAB, for example.
To set the export format, use FORMat[:DATA].
Suffix:
<m>
.
1..10
See "Selection of the measurement: MEASurement<m>"
on page 1249.
Usage: Query only
18.12.11 Gating
MEASurement<m>:GATE[:STATe]................................................................................. 1302
MEASurement<m>:GATE:MODE...................................................................................1303
MEASurement<m>:GATE:ABSolute:STARt.....................................................................1303
MEASurement<m>:GATE:ABSolute:STOP..................................................................... 1303
MEASurement<m>:GATE:RELative:STARt.....................................................................1303
MEASurement<m>:GATE:RELative:STOP......................................................................1303
MEASurement<m>:GATE:CURSor................................................................................ 1304
MEASurement<m>:GATE:CCOupling............................................................................ 1304
MEASurement<m>:GATE:ZCOupling.............................................................................1304
MEASurement<m>:GATE:ZDIagram..............................................................................1305
MEASurement<m>:GATE:GCOupling............................................................................ 1305
MEASurement<m>:GATE[:STATe] <State>
Considers the gating settings of the source waveform for the measurement.
Suffix:
<m>
.
1..10
See "Selection of the measurement: MEASurement<m>"
on page 1249.
Parameters:
<State> ON | OFF
*RST: OFF
Automatic measurements