Rohde & Schwarz RTE - Time Scale;Acquisition Time; Acquisition Time; Time Scale

Acquisition and waveform setup
R&S
®
RTE
177User Manual 1326.1032.02 ─ 20
Time scale...................................................................................................................177
Acquisition time...........................................................................................................177
Reference point...........................................................................................................178
Position....................................................................................................................... 178
Restrict horizontal position to acquisition range..........................................................178
Sample rate.................................................................................................................178
Resolution................................................................................................................... 178
Record length..............................................................................................................178
ZVC Resolution...........................................................................................................179
ZVC Record length......................................................................................................179
Resolution / Record length (Resolution dependency).................................................179
Auto adjustment (Resolution dependency)................................................................. 179
Record length limit (Resolution dependency)............................................................. 179
Roll mode....................................................................................................................180
└ Minimum acquisition time..............................................................................181
Time scale
Sets the horizontal scale for all channel and math waveforms in seconds per division.
Increase the scale to see a longer time interval of the waveform. Decrease the scale to
see it in more detail. The scale has a point that remains fixed on the screen when the
scale value is changing - the reference point.
Remote command:
TIMebase:SCALe on page 1108
Acquisition time
Shows the time of one acquisition, that is the time across the 10 divisions of the dia-
gram:
Acquisition time = Time scale * 10 divisions
Changing the acquisition time changes the time scale too.
Remote command:
TIMebase:RANGe on page 1108
Horizontal settings