Data and file management
R&S
®
RTE
476User Manual 1326.1032.02 ─ 20
12.1.4 Saving and loading settings
Settings can be stored in a file with user-defined name and location, or in a quick save-
set. The settings in a saveset can be saved and retrieved quickly at the touch of a but-
ton, so savesets are ideal for frequently used measurements.
For details on save/recall instrument settings and associated remote commands, see
Chapter 12.1.1, "Savesets", on page 471.
To save settings to a saveset file
Alternatively, you can add the " Save settings" icon to the toolbar and use the icon to
store the saveset file to the folder and file specified in the "Settings" tab.
See also Chapter 3.4.7.2, "Configuring the toolbar", on page 119.
1. Press the [FILE] key.
2. In the "Save" tab, press the "Saveset" button .
3. Tap "Save" to save the settings to the specified file.
Tap "Save As" to save the settings to a different file. Select the file and directory
from the file selection dialog box.
The current settings are saved to the selected file.
To load settings from a saveset file
Alternatively, you can use the "Graphical Recall" function on the toolbar.
See Chapter 12.1.3, "Graphical Recall function", on page 474.
1. Press the [FILE] key.
2. Select the "Recall" tab.
3. Press the "Saveset" button.
4. Tap "Load" to load the settings from the specified file.
Tap "Open" to navigate to a different file. Select the file from the file selection dialog
box and tap "Select".
The saved settings are loaded to the R&S RTE.
To save a One File
1. If you want to save reference waveforms in the One File, create and display the
reference waveforms.
2. Press the [FILE] key.
3. In the "Save" tab, tap the "One File".
4. Tap "Save" to save the settings to the specified file.
Save and recall user settings
To Next Page
Loading...
