Rohde & Schwarz RTE - Vertical

Remote control commands
R&S
®
RTE
1116User Manual 1326.1032.02 ─ 20
ACQuire:SEGMented:STATe <State>
Switches the fast segmentation mode on and off.
Parameters:
<State> ON | OFF
*RST: OFF
Usage: Asynchronous command
ACQuire:SEGMented:MAX <MaxAcquisitions>
The number of acquisitions in a fast segmentation acquisition series depends on the
record length.
Parameters:
<MaxAcquisitions> ON | OFF
ON
Acquires the maximum possible number of acquisitions in a ser-
ies.
OFF
Acquires the number of acquisitions defined using ACQuire:
COUNt.
*RST: OFF
Usage: Asynchronous command
ACQuire:SEGMented:AUToreplay <ReplayAfterAcq>
If enabled, the instrument starts processing and displaying the data as soon as the
acquisition series is captured completely. Depending on the number of acquisitions, it
may take some time until the acquisition series is displayed. If the setting is disabled,
the instrument only captures the data and stores it in the sample memory.
Parameters:
<ReplayAfterAcq> ON | OFF
*RST: ON
Usage: Asynchronous command
18.8.5 Vertical
CHANnel<m>:STATe.....................................................................................................1117
CHANnel<m>:COUPling............................................................................................... 1117
CHANnel<m>:GND.......................................................................................................1117
CHANnel<m>:SCALe....................................................................................................1118
CHANnel<m>:RANGe...................................................................................................1118
CHANnel<m>:POSition................................................................................................. 1118
CHANnel<m>:OFFSet...................................................................................................1119
CHANnel<m>:INVert.....................................................................................................1119
Acquisition and setup