Rohde & Schwarz RTE - Symbolic Decode Results; Symbolic Search

Remote control commands
R&S
®
RTE
1526User Manual 1326.1032.02 ─ 20
Parameters:
<DataPattern> Decimal representation of the data pattern
Range: -100E+24 to 100E+24
Increment: 0.5
*RST: 0
TRIGger<m>:CAN:SYMBolic:SGEValue <SignalEnumValue>
Sets a symbolic data value for signals with enumerated values.
Parameters:
<SignalEnumValue> Numeric value according to the value definition in the DBC file
Example: Definition line in DBC file:
VAL_ 2175091489 Gear 0 "Idle" 1 "Gear_1" 2 "Gear_2" 3 "Gear_3"
4 "Gear_4" 5 "Gear_5" ;
Search for "Gear_4"
TRIGger:CAN:SYMBolic:SGEValue 4
Symbolic decode results
BUS<m>:CAN:FRAMe<n>:SDATa?
Returns the complete symbolic data of the selected frame.
Suffix:
<m>
.
1..4
Selects the serial bus.
<n> *
Selects the frame.
Return values:
<SymbolicData> String with comma-separated list of symbolic data
Example:
BUS:CAN:FRAMe9:SDATa?
<-- [sym] 325 kW, 0x0A, 423 N, 174 l, Running, 90 degC, 0x06, 437 rpm
Returns the symbolic results of the 9th frame.
Usage: Query only
Symbolic search
SEARch:RESult:CAN:FRAMe<m>:SDATa?.................................................................... 1527
SEARch:TRIGger:CAN:SSYMbolic................................................................................ 1527
SEARch:TRIGger:CAN:SYMBolic:MSGValue..................................................................1527
SEARch:TRIGger:CAN:SYMBolic:SSIGnals................................................................... 1528
SEARch:TRIGger:CAN:SYMBolic:SIGValue................................................................... 1528
SEARch:TRIGger:CAN:SYMBolic:DMIN.........................................................................1528
SEARch:TRIGger:CAN:SYMBolic:DMAX........................................................................1528
SEARch:TRIGger:CAN:SYMBolic:SGEValue.................................................................. 1529
Protocols