Rohde & Schwarz RTE - Page 1527

Remote control commands
R&S
®
RTE
1527User Manual 1326.1032.02 ─ 20
SEARch:RESult:CAN:FRAMe<m>:SDATa? <SearchName>
Returns the symbolic data of the selected result frame.
Suffix:
<m>
.
*
Sets the index of the search result frame.
Query parameters:
<SearchName> String that contains the search definition name
Return values:
<SymbolicData> String with comma-separated list of symbolic data
Example:
SEARch:RESult:CAN:FRAMe:SDATa? 'Search1'
<-- [sym] 325 kW, 0x0A, 423 N, 174 l, Running, 90 degC, 0x06, 437 rpm
Returns the symbolic results of the first search result.
Usage: Query only
SEARch:TRIGger:CAN:SSYMbolic
<SearchName>,<CheckSymbolic>
SEARch:TRIGger:CAN:SSYMbolic? <SearchName>
Enables the symbolic search and disables all other search criteria.
Parameters:
<CheckSymbolic> ON | OFF
*RST: OFF
Parameters for setting and query:
<SearchName> String that contains the search definition name
SEARch:TRIGger:CAN:SYMBolic:MSGValue <SearchName>, <MessageName>
SEARch:TRIGger:CAN:SYMBolic:MSGValue? <SearchName>
Sets the message to be triggered or searched for.
The setting is used by symbolic trigger and symbolic search. Thus, you always trigger
on and search for the same message if symbolic trigger and symbolic search is used at
the same time.
See also: TRIGger<m>:CAN:SYMBolic:MSGValue on page 1525
Parameters:
<MessageName> String that contains the symbolic message name
Parameters for setting and query:
<SearchName> String that contains the search definition name
Example:
SEARch:TRIGger:CAN:SYMBolic:MSGValue "Search1","EngineData"
Protocols