Data and file management
R&S
®
RTE
506User Manual 1326.1032.02 ─ 20
Remote command:
HCOPy:DEVice<m>:LANGuage on page 1413
HCOPy:DESTination<1..2> on page 1412
MMEMory:NAME on page 1413
HCOPy:IMMediate<m>[:DUM] on page 1416
HCOPy:IMMediate<m>:NEXT on page 1416
MMEMory:DELete on page 1394
12.4.2 Printing screenshots
You can configure the format and colors used for printing, and edit the image.
1. Open the "File" menu and select "Print setup". You can use a local printer or a net-
work printer. Depending on the printer driver, printing to a file is also possible. See
also "Printer" on page 503.
2. Tap the printer selection box. Select the printer.
3. Tap the "Color" selection box to configure black and white or color images.
4. Tap the "Orientation" selection box and select the paper format.
5. To enhance the images for print on white paper, enable "White background" or
"Inverse color".
6. If the current display is likely to have changed since you have opened the "Print
Setup" dialog box (e.g. due to a running measurement), tap "Update image".
The screenshot is updated.
7. To zoom into the screenshot, enable the "Zoom" option beneath the preview area.
The image is enlarged and scrollbars are displayed to scroll through the image.
8. To edit the image in an external application and process it further from there, tap
"Edit image".
9. To print the image to the selected printer, tap "Print".
12.4.3 Configuring and saving screenshots
You can edit the image, invert all colors, and set the background color. A preview of the
current image is shown for reference.
1. Open the "File" menu and select "Print setup".
2. To enhance the images for later print on white paper, enable "White background" or
"Inverse color". If you print this image later on a monochrome printer, you get a
grayscaled picture. The contrast of the resulting gray lines depends on waveform
colors and the used printer.
Screenshots
To Next Page
Loading...
