Rohde & Schwarz RTE - Page 503

Data and file management
R&S
®
RTE
503User Manual 1326.1032.02 ─ 20
You can edit the image before saving or printing, and include an open dialog box in the
image. The signal bar is always shown beside the diagram.
You can save the image in the "Screenshot" dialog box. To save screenshots quickly,
use the "Save Screenshot" toolbar icon, or configure and use the [PRINT] key.
Printer control
..............................................................................................................503
└ Printer........................................................................................................... 503
└ Color............................................................................................................. 504
└ Orientation.................................................................................................... 504
Print.............................................................................................................................504
Preview....................................................................................................................... 504
└ Zoom.............................................................................................................504
Update.........................................................................................................................504
White background....................................................................................................... 504
Inverse color................................................................................................................505
Show setup dialog.......................................................................................................505
Include signal bar........................................................................................................505
Edit..............................................................................................................................505
Save to file.................................................................................................................. 505
Printer control
Defines the printer control settings.
Printer ← Printer control
Selects a configured printer to print screenshots and reports. You can use a local
printer or a network printer. The instrument firmware uses the Windows printer configu-
ration, no additional printer setup is required. To make a printer available for R&S RTE,
add and configure it in the Windows operating system: "Settings" > "Devices" > " Print-
ers and scanners". Only users with administrator rights can fulfill this task.
Screenshots