Data and file management
R&S
®
RTE
504User Manual 1326.1032.02 ─ 20
Depending on the printer driver, printing to a file is also possible. By default, the
Rohde & Schwarz printer drivers for BMP, JPG, PDF, PNG, and TIFF files are installed.
Remote command:
SYSTem:COMMunicate:PRINter:SELect<1..2> on page 1417
Color ← Printer control
Defines the color mode for printing. The setting affects the output on a printer and also
the printing to BMP, JPG, PDF, PNG, and TIFF files.
"Black and
white"
Black and white output
"Color"
Color output
Remote command:
HCOPy:DEVice<m>:COLor on page 1414
Orientation ← Printer control
Toggles the page orientation between "Landscape" and "Portrait."
Remote command:
HCOPy:PAGE:ORIentation<1..2> on page 1414
Print
Prints the current image together with saved editing changes on the selected Printer.
If the printer is configured to print to a file, "Print" is an alternative of "Save image to
file".
Remote command:
HCOPy:DESTination<1..2> on page 1412
HCOPy:IMMediate<m>[:DUM] on page 1416
HCOPy:IMMediate<m>:NEXT on page 1416
Preview
Shows a preview of the screenshot. The image is created when the dialog box opens.
Zoom ← Preview
Enlarges the preview display and adds scrollbars to zoom into specific areas of the
print image. Zooming does not affect the original display.
Update
Updates the preview of the screenshot with the current display view, e.g. after changes
to the settings have been made, or an additional channel has been activated.
White background
Inverts the background color. So you can picture waveforms with normal waveform col-
ors on white background.
If both "White background" and Inverse color are enabled, the instrument inverts the
background twice, and it appears black.
Screenshots
To Next Page
Loading...
