Data and file management
R&S
®
RTE
496User Manual 1326.1032.02 ─ 20
".bin/.xml/.csv"
Selects the file format.
Remote command:
EXPort:HISTogram:NAME on page 1408
EXPort:MEASurement:SAVE on page 1411
EXPort:MEASurement:DATA? on page 1411
12.2.6 CSV export
Access: [FILE] > "Save" tab > "CSV Export".
In this dialog, you can define the format of your CSV file.
Decimal symbol
Selects if point or comma is used as a decimal symbol in the exported CSV file.
Remote command:
EXPort:RESult:DECSymbol on page 1410
List separator
Selects the list separator symbol from a list. Available are semicolon, comma, space,
tab and colon.
Remote command:
EXPort:RESult:DELimiter on page 1410
12.2.7 Saving and loading waveform data
You can save the data of a channel, math or reference waveform to an .xml, .csv,
or .bin file. The data export of several channels into one file is also possible. Files
in .bin format can be reloaded to the R&S RTE as reference waveforms.
Instead of a complete waveform, you can also save a part of it, limited by a previously
defined zoom, cursor lines, measurement gate or user-defined time values.
To save waveform data quickly, you can add the "Save Waveform" icon to the toolbar
and use it for saving. The icon does not work for saving actions that are started with
"Start export" (data logging and multiple history waveforms).
It is also possible to save history data to file. Furthermore, you can save a "live record"
of a running RUN Nx SINGLE acquisition to one data file.
Waveform data and results
To Next Page
Loading...
