Rohde & Schwarz RTE - Page 1408

Remote control commands
R&S
®
RTE
1408User Manual 1326.1032.02 ─ 20
Parameters:
<Name> String with the histogram name.
Example: See "Exporting histogram data to file" on page 1059
Usage: Asynchronous command
EXPort:HISTogram:INCidence <Incidence>
Sets the mode of exported data: relative or absolute frequency of amplitude values.
Parameters:
<Incidence> ABS | REL
*RST: REL
Example: See "Exporting histogram data to file" on page 1059
Usage: Asynchronous command
EXPort:HISTogram:NAME <Path>
Sets the file name and path to save the histogram to.
Parameters:
<Path> String with path and file name. The file extension defines the file
format: XML, CSV, or BIN.
Example: See "Exporting histogram data to file" on page 1059
Usage: Asynchronous command
EXPort:HISTogram:SAVE
Saves the histogram to the file specified with EXPort:HISTogram:NAME.
Example:
See "Exporting histogram data to file" on page 1059
Usage: Event
Asynchronous command
EXPort:HISTogram:DATA?
Transfers the histogram data to the controlling computer. The data can be used in
MATLAB, for example.
To set the export data format, use FORMat[:DATA].
Return values:
<Data> List of values according to the format settings and EXPort:
HISTogram:INCidence.
See also: Chapter 12.2.3, "Waveform histogram", on page 490
Example: See "Transferring histogram data" on page 1059.
Usage: Query only
Data management